Products

Products

Products

Swipe Down

Thermal Conductive Materials

Heat Dissipation Device

Heat dissipation module

Structural adhesive

Protective coating

Liquid Silicone Rubber

Special materials

Air-Cooled Server Module Heat Sink

The air-cooled module heat sink transfers heat from the chip to the heat pipe through thermal conduction.
Single-Component Silicone Adhesive

Single-component silicone adhesive cures through a moisture-induced crosslinking reaction with moisture in the air, forming an elastic silicone rubber after curing.
Manifold

A liquid cooling manifold is a core fluid distribution device in the secondary cooling loop of a liquid-cooled data center. It enables precise coolant distribution, centralized return collection, and dynamic flow control. It mainly consists of supply and return headers, branch ports, flow control units, and sealing components.
Synthetic Graphite Sheet

Synthetic graphite sheet is an advanced thermal management material featuring high crystallinity, excellent crystal orientation, and low lattice defect density.
Quick Disconnect

A UQD is a standardized component used for the rapid connection and disconnection of coolant lines in liquid cooling systems.
Graphene Thermal Pads

Synthetic graphite sheet is an advanced thermal management material featuring high crystallinity, excellent crystal orientation, and low lattice defect density.
Stainless Steel Corrugated Tube

Stainless steel corrugated tubes feature an all-metal construction, primarily consisting of 316L stainless steel thin-wall tubing, connectors, and insulating sleeves. These components are joined using precision processes such as laser welding and vacuum brazing to ensure leak-free operation and long service life.
SCCG Gasket

With excellent flexibility, it remains intact even after being bent through 180°
Carbon Fiber Thermal Silicone Pad

The Carbon Fiber Thermal Silicone Pad is a high-performance thermal interface material (TIM)
Ultra-thin Stainless Steel VC

Ultra-thin stainless steel VC is a high-strength vacuum phase-change heat dissipation device made of SUS316L stainless steel substrate.
Ultra-thin Copper VC

Ultra-thin copper VC is a vacuum phase-change thermal management device manufactured from high-purity copper using precision etching, vacuum brazing, and sintered wick technologies.
Thermal Silicone Pad

The STP series thermal conductive silicone gasket products are an excellent thermal interface material featuring superior thermal conductivity
Thermal Grease

Thermal Grease is a non-curing, high-temperature-resistant thermal interface material with a paste-like consistency and extremely low thermal resistance
Standard Vapor Chamber (VC)

The standard vapor chamber (VC) is an industrial-grade phase-change heat transfer device featuring an oxygen-free copper enclosure with a sintered copper powder or copper mesh wick structure.
Single-Component Thermal Gel

The Single-Component Thermal Gel is a pre-formed, non-curing, non-flowing thermal interface material
Two-Component Thermal Gel

The Two-Component Thermal Gel consists of Part A and Part B, mixed at a 1:1 ratio and cured either at room temperature or under elevated temperature to form a soft, elastic material.
Heat Pipe

A heat pipe is a passive, highly efficient heat transfer device that utilizes phase change of an internal working fluid to transfer heat, achieving an equivalent thermal conductivity of 5,000–10,000 W/(m·K).
Thermal Conductive Potting Compound

A two-component addition-cure silicone thermal conductive potting compound featuring low viscosity and excellent flowability, as well as outstanding electrical insulation and flame-retardant properties.
Centrifugal Cooling Fan

Designed for high-performance gaming laptops, thin-and-light creator laptops, and mobile workstations
Phase Change Thermal Pad

Phase Change Thermal Pads effectively fill air gaps and voids between mating surfaces, replacing trapped air between heat-generating electronic components and heat sinks.
Axial Cooling Fan

Designed for industrial equipment, home appliances, cabinets, enclosures, and energy storage systems, our axial cooling fans provide a cost-effective air-cooling solution for general ventilation and heat dissipation in stationary equipment.
Industrial Server Cooling Fan

Designed specifically for high-density GPU computing platforms, our industrial-grade server cooling fans provide long-term, reliable air-cooling solutions for high-power computing applications.
TEC Thermoelectric Cooler

TEC (Thermoelectric Cooler), also known as a thermoelectric cooling device or Peltier cooler, is a precision temperature-control component based on solid-state thermoelectric conversion technology.
Liquid Cooling Module

A liquid cooling module consists primarily of a cold plate, connecting tubing, quick disconnects, leak detection devices, and internal coolant.
Liquid Silicone Rubber (LSR)

Liquid Silicone Rubber (LSR) offers outstanding resistance to both high and low temperatures, excellent resilience, and is environmentally friendly and non-toxic. It provides superior cushioning, sealing, and thermal insulation
Nano Protective Coatings

Nano protective coatings are manufactured using highly reactive free-radical organic monomers in the vapor phase.
Nanocrystalline Magnetic Materials

Nanocrystalline soft magnetic materials are produced by subjecting amorphous alloys to controlled crystallization annealing
Amorphous Alloy Magnetic Shielding Sheets

Amorphous alloy magnetic shielding sheets are manufactured from iron-based amorphous alloys,
AG Glass

Anti-glare glass (abbreviated as AG glass) is a type of glass with a specially treated surface.

Explore more

Do you need any help?